Nowadays, there are so many products of power jumper for water cooling in the market and you are wondering to choose a best one.You have searched for power jumper for water cooling in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings power jumper for water cooling which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
680 reviews analysed
1. CRJ 24-Pin ATX Red LED Power On/Off Switch Jumper Bridge Cable, Black Sleeved 22"
- 20/24-Pin ATX/EPS Power Switch Cable Allows You To Easily Turn On And Off Your ATX Power Supply
- Illuminated RED LED Power Switch Indicates When Power Supply Is Turned On
- Ideal For Use In Water Cooling Applications For Pulsing Water Cooling Pump On And Off
- High Quality Construction Featuring High-Density Black Sleeving And 18 AWG Wire
- Total Cable Length (Including Connectors): 22″
The CRJ Electronics Red LED Switch ATX Jumper allows you to conveniently turn your ATX power supply on and off. Ideal for use in many applications. Especially convenient for quickly switching your power supply on and off to pulse your water pump to eliminate water bubbles from your water cooling loop.
2. Antrons 24-Pin ATX/EPS PSU Jump Starter Bridge
- 24 Pin ATX Jump Start Power Supply Bridging Connector Plug
- Run, and Power Up Any ATX/EPS Power Supply, By its self.
- NO MotherBoard Needed to power up your PSU
- Great for Bitcoin Mining! Can accept 24Pin aswell as 20Pin ATX Power Supplys
- Use Your PSU for things other then your PC, Such as BTC Miners.(Antminer , Block Erupter , Avalon ,Etc.!)
24 Pin ATX Jump Start Power Supply Bridging Connector Plug.Run Any ATX/EPS Power Supply, By its self.No MotherBoard or PC Needed.Great for BitCoin Miners and Rigs!
3. SDTC Tech 24-Pin ATX Power Supply Jumper Bridge Tool PSU Test Starter Without Being Plugged Into The Motherboard
- 24-Pin ATX/EPS Power Supply Start Up Jumper Bridge Tool is compatible with 20/24 pin connector.
- Test starter allows the PSU to be powered on without being plugged into a motherboard.
- 24-Pin Bridging Connector Plug can run and start up any ATX/EPS power supply by its self.
- The jumper is using 1007 18AWG cable for reliability in long use.
- Often used in assembling/testing PC water cooling systems, BTC Miners, testing lights, fans, hard drives or the power supply itself etc.
1. Compatible with 20-Pin and 24-Pin ATX Power Supply
2. Can power up PSU without accessing motherboardSpecification:
Name: 24 Pin ATX Jump Start Power Supply Bridging Connector Plug
Cable: 1007 18AWG
Package Include: 1x 24-Pin ATX Power Supply Jumper Bridge Tool
4. XSPC ATX PSU Bridge Tool (24 Pin), Black
XSPC offers this handy tool for your ATX power supplies. Simply plug in your 24-Pin motherboard ATX lead from your power supply into this adapter and it will trick your power supply into thinking a motherboard is attached, perfect for power supply testing or for using your power supply outside of a case. Great for testing lights, fans, hard drives or the power supply itself when you don’t have access to a motherboard, or simply don’t need one. The tool will fit both 20 and 24pin ATX power supplies.
5. New Mini Excavator Track Roller/Bottom Roller for John Deere JD27ZTS
6. OEMTOOLS 24361 Replacement Jumper Cables for Personal Power Sources
The OEMTOOLS jump start battery clamps have a built-in diode to prevent back-charge to the MICRO-START from the vehicle.
7. CRJ 24-Pin ATX Power Supply Jumper Bridge Tool
8. COMeap (2-Pack 24 Pin Jumper ATX EPS PSU Power Supply Starter Bridge Tester Connector
The COMeap 24 Pin ATX/EPS PSU Jump Starter allows you to run and power up any ATX/EPS power supply. No MotherBoard or PC Needed.
Connectors: 1x 24 pin female ATX plug;
24 Pin ATX/EPS PSU Jump Starter*2pcs;
Warranty: 1 year;
9. SamIdea 6-Pack 100x25x10mm Aluminium Heatsinks Heat Sink Module Cooler Fin Good Thermal Conductivity Cooling for Power Amplifier Transistor
- ★★★★★ Product Name : Heat Sink
- Material : Aluminum,Size: 100 x 25 x 10mm/3.94 x 0.98 x 0.39inch(L x W x H).
- ★★★★★ Material: Aluminium
- Color: Silver Tone
- Fins Number: 8.
- ★★★★★ Base Board Thickness: 4.2mm
- Pin Board Thickness: 1.5mm(1.8mm for two pin boards outside).
- ★★★★★ APPLICATION: 100x25x10mm silver tone aluminum heatsink heat sink cooling fin. Great for cooling LED, Power IC, Power Amplifier,and Transistors etc.
- ★★★★★ 100% satisfaction guarantee
- SamIdea is a Registered Trademark, can not sold without authorization.
Size: 100 x 25 x 10mm/3.94 x 0.98 x 0.39inch(L x W x H)
Quantity: 8 pcs
Color: Silver Tone
Fins Number: 8
NOTE: Please check the specification and make sure that the size of the heatsink fits your component.
Ideal to be used for cooling LED, Power IC, Power Amplifier,and Transistors etc.
-8 * Aluminium Heatsink(Glue not included)
10. EKWB EK-ATX Bridging Plug (24 pin)
EK-ATX Bridging Plug (24 pin)
– Ideal for use with 12v Water Pumps to power up without mainboard power.
– Fits 24 Pin ATX PSU’s
By our suggestions above, we hope that you can found Power Jumper For Water Cooling for you.Please don’t forget to share your experience by comment in this post. Thank you!