Finding your suitable readers for cooling fan with heatsink is not easy. You may need consider between hundred or thousand products from many store. In this article, we make a short list of the best readers for cooling fan with heatsink including detail information and customer reviews. Let’s find out which is your favorite one.
946 reviews analysed
1. Thermaltake 7-bladed 92mm 4-Pins PWM Aluminum Extrusion CPU Cooling Fan for Intel Core i7/i5/i3 CLP0556-B
Thermaltake 7-bladed 92mm 4-Pins PWM Aluminum Extrusion CPU Cooling Fan for Intel Core i7/i5/i3 CLP0556-B
Gravity i2 is a simple low-profile CPU cooler with a compact size 92mm fan in 7-bladed design; aluminum extrusion heatsink can dissipate heat up to 95W. Optimized solution for low power processors. Gravity i2 supports Intel Socket LGA 1150/1155/1156.
Compatibility: Intel LGA 1156/1155/1150/1151
Heatsink Material: Aluminum
Fan Dimension: ∅92 x 25 mm
Fan Speed: 1800 RPM
Rated Voltage: 12 V
Start Voltage: 6 V
Rated Current: 0.12 A
Power Input: 1.44 W
Air Flow: 31.343 CFM
Air Pressure: 1.484 MM-H2O
Noise: 21.3 dBa
Life time/Fan Life time: 40,000 hours
pin connect: 3 pin
Cooling Power: 95 W
Heatsink Dimension: 63 H * 95.8 W * 95.8 L mm
Weight: 320 g
2. Cooler Master RR-212L-16PR-R1 Hyper 212 LED CPU Cooler with PWM Fan, Four Direct Contact Heat Pipes, Unique Blade Design and Red LEDs
- Four direct contact heat pipes for continuous contact between CPU and cooler
- Upgradable to Dual fans with quick snap fan bracket
- Quiet spin exclusive technology stabilizes the driver that spins the blades, reducing clicks and noisy vibrations
- Wide range PWM fan with unique Blade design and red LEDs
- Versatile all in one mounting solution for Intel and AMD sockets, and optimized bracket design for Easy Installation
3. BAY Direct Heatsink Cooling fan for DaHua DVR/HDCVI Camera Fan DVR Motherboard Fan 5V DAHUA Fan with 2 Wire 2 Pin
1 * DaHua DVR HDCVI Camera Fan
1 * Warranty Card
4. iUniker Raspberry Pi 4 Fan, Raspberry Pi Dual Fan with Raspberry Pi Heatsink, Raspberry Pi Fan for Raspberry Pi 4 Model B, 3B+/Pi 3 B/Pi 2 B
- NOTICE: It can’t fit Retroflag Nespi Case and Case+, if you want use our dual fan in this case, you should modifiy the Retroflag Case and breaking the tabs on the single fan location.
- Efficient drop temp of your Pi by using our heatsink fan.
- Custom size fan can fit most of the raspberry Pi case.
- Custom 3M heat conductive strip can make sure you Pi works stable when you are overclocking.
- Upgrade bearing of this fan not only can make sure outputing a lot of wind,but also quiet enough.
5. Intel Fan Heatsink Assembly Air 1151 Cooling BXTS15A
Intel Fan Heatsink Assembly, Air Cooling, Supports the LGA115x Sockets, NOT Designed for Overclocking
6. MakerFocus 2pcs Raspberry Pi DC Brushless Cooling Fan Heatsink Cooler Radiator Connector Separating One-to-Two Interface 3.3V 5V for Raspberry Pi 2/ Pi 3/3B+ and Pi Zero/Zero W or Other Robot Project
- √. Installation Screws Included: Don’t need to purchase screws by yourself. Intimate service, easy to install!
- √. Super Quiet: This fan will not make you feel uneasy during they are working, but also a quiet experiment environment for you. Perfect Cooling Tool: Allows your Raspberry Pi or other experimental tools to quickly dissipate heat and will extend the working life of your Pi or other development boards!
- √. Unique Terminal Interface: It with two terminals, Its connector is separating, One-to-Two interface, can choose 3.3V or 5V. According to the voltage requirements in accordance with your needs to choose which to use
- Working voltage: 3.0-5.8V
- Current: 0.18A. Air volume: 5 m³/ h
- Number of revolutions: 13200RPM.
- √. Suitable for A Variety of Products: Pi fan, Raspberry Pi zero w heatsink, suitable for Raspberry Pi 2/ Pi 3/3B+ and Pi Zero/Zero W, Retroflag NESPi case and Nespi Case. Not only using them for Raspberry Pi but also for cooling of a desert traversing robot project. It just another addition to them fleet. Will works wonderfully!
- √. Strong After-sales Service Team: As long as you have any questions about the product, we will resolve your issue immediately if received your email, your satisfactory purchase experience is our greatest hope! How to email us? Plz click “MakerFocus” and click “Ask a question” to email us! Looking forward to your consultation!
2pcs Raspberry Pi DC Brushless Cooling Fan Heatsink Cooler Radiator Connector Separating One-to-Two Interface 3.3V 5V for Raspberry Pi 2/ Pi 3/3B+ and Pi Zero/Zero W
This Pi fan not only support Raspberry Pi 2/ Pi 3/3B+ and Pi Zero/Zero W, but compatible with other development board.
Its connector is separating, One-to-Two interface, can choose 3.3V or 5V.
Rated voltage: DC5V
Working voltage: 3.0-5.8V
Air volume: 5 m³ / h
Number of revolutions: 13200RPM
Noise: 18 dB
2 * pi fan
8 * nuts M2.5
8 * screw M2.5 * 14mm
7. Intel E97379-001 Core i3/i5/i7 Socket 1150/1155/1156 4-Pin Connector CPU Cooler With Aluminum Heatsink and 3.5-Inch Fan For Desktop PC Computer
Intel Socket 1155/1156 Aluminum Heat Sink & 3.5″ Fan w/4-Pin Connector up to Core i3 3.06GHz
8. Corsair Vengeance Airflow Memory Cooling Fan CMYAF
CORSAIR Vengeance Airflow Memory fan unit – for Vengeance Pro Series
9. GeeekPi Raspberry Pi 4 Fan, Raspberry Pi Cooling Fan 30x30x7mm DC 5V Brushless CPU Cooling Fan with 7PCS Raspberry Pi Heatsink for Raspberry Pi 4 Model B,3B+,Pi 3 & Retroflag NESPI CASE Plus (1-Pack)
- Used for Raspberry Pi 4,Pi 3, Pi 2, Pi Model B+ & Retroflag NESPI CASE PLUS
- The DC 5V cooling fan run smoothly and quietly and it’s good for heat dissipation of Raspberry Pi. It can be assembled easily by screws.
- The aluminum heatsinks has thermal conductive adhesive tape on the back.
- Package Includes: 1x Cooling Fan, 1x Screw Set, 3x Heatsinks for raspberry pi 3B+/3B/2B/B+,4x Heatsinks for raspberry pi 4 Model B
- NOTE: Raspberry Pi Not Included
It used for used for Raspberry Pi 4,Pi 3, Pi 2, Pi Model B+.
The DC 5V cooling fan run smoothly and quietly and it’s good for heat dissipation of Raspberry Pi. It can be assembled easily by screws.
The aluminum heatsinks has thermal conductive adhesive tape on the back.
1x Cooling Fan
1x Screw Set
3x Heatsinks for raspberry pi 3B+/3B/2B/B+
4x Heatsinks for raspberry pi 4 Model B
10. 4 PCS 3D Printer Cooling Fan, 40mm x 40mm x 10mm Oil Bearing Cooling Fan with 2 Pin Terminal for Hotend Extruder Heatsinks Makerbot MK7 MK8 CPU Chip Arduino(12V 0.08A)
- ☀☀ Power Connection: 2 Pin-ph2.5.
- ☀☀ Great replacement item for your all metal hotend or maybe a small cooling fan for your 3D printer nozzle setup.
- ☀☀ Two terminal cable length is 110 centimeters (110cm). Connector is already fitted and product is out-of-the-box ready for installation.
- ☀☀ Made of high quality plastics with high end bearings, this 3D printer part cooling fan can run continuously for days at high speeds without hassle or concern.
- ☀☀ Size:40mm*40mm*10mm(L*D*H), Speed:6000RPM, Noise:27dBA, Bearing: oil, DC 12V, 0.08A.
By our suggestions above, we hope that you can found Cooling Fan With Heatsink for you.Please don’t forget to share your experience by comment in this post. Thank you!