Top 9 40Mm Cooling Fan Heat Sink

0

Finding your suitable readers for 40mm cooling fan heat sink is not easy. You may need consider between hundred or thousand products from many store. In this article, we make a short list of the best readers for 40mm cooling fan heat sink including detail information and customer reviews. Let’s find out which is your favorite one.

728 reviews analysed

1. ANVISION 2-Pack 40mm x 10mm DC 12V Brushless Cooling Fan, Dual Ball Bearing, YDM4010B12

ANVISION 2-Pack 40mm x 10mm DC 12V Brushless Cooling Fan, Dual Ball Bearing, YDM4010B12

Feature

Description

Color:Black ( 12V 40mm 2-PIN FAN )

Dimension: 40*40*10mm
Housing: Black PBT (UL94V-0)
Fan Blade: 7 Blades, Black PBT (UL94V-0)
Bearing System: Two Ball Bearings
Net Weight: 13.7g

Rated Voltage: 12V DC
Operating Voltage Range: 10.8-13.2V DC
Start-up Voltage: 6.0V DC
Rated Current: 0.04A (0.10A Max.)
Rated Power: 0.48W (1.2W Max.)

Rated Speed: 6200PRM
Air Flow: 7.56CFM
Air Pressure: 3.19mmH2O
*Noise Level: 27.50dB(A)
Lift Expectancy: 50000H at 25degree test

*Acoustical Noise Testing Condition: Fan is hanged in anechoic chamber, noise is measured at rated voltage in anechoic chamber with microphone at a distance of 1 meter formthe air intake.

2. GeeekPi 4pcs Raspberry Pi 4 Quiet Fan, Raspberry Pi Cooling Fan 40x40x10mm 4010 Fan DC 5V 3.3V Brushless CPU Cooling Fan Cooler Radiator for Raspberry Pi 4 Model B, Raspberry Pi 3B+/3B/2B (Blue)

GeeekPi 4pcs Raspberry Pi 4 Quiet Fan, Raspberry Pi Cooling Fan 40x40x10mm 4010 Fan DC 5V 3.3V Brushless CPU Cooling Fan Cooler Radiator for Raspberry Pi 4 Model B, Raspberry Pi 3B+/3B/2B (Blue)

Feature

Description

Color:Blue

Descriptions:
This is 4010 type fan for Raspberry Pi or other development board.
When the fan turns up, you will see Blue light
It’s high quality and low consumption and low noise.
Used for used for Raspberry Pi 4,Pi 3, Pi 2, Pi Model B+.
The DC 5V cooling fan run smoothly and quietly
It’s good for heat dissipation of Raspberry Pi.
It can be assembled easily by screws.

Features:
4010 Fan
High quality
Low consumption
Super quiet
Easy to setup

How to connect:
Connect to 5V and GND on GPIO Pins
PS: You can also move the red wire to 3V3 pin to reduce the speed of the fan.

Package Includes:
4x Cooling Fan
4x Screw Set

NOTE:
Raspberry Pi Not Included

3. Wathai DC Brushless Cooling Fan 40mm x 10mm 12V 3Pin Mini Heatsink Cooler Fans

Wathai DC Brushless Cooling Fan 40mm x 10mm 12V 3Pin Mini Heatsink Cooler Fans

Feature

Description

Package include: 1 Piece fan and mounting screws & nuts
Size:40x40x10mm
Rated Voltage:12V
Rated Current: 0.06A
Connecter: 3Pin
Power: 0.7W
Speed: 4500RPM
Air flow: 4.95CFM
Noise:24dBA
Bearing type: Sleeve Bearing
Cable Length: 25cm Or 10 inches
Life: 35000 hours
Weight:16g/pcs or 0.55oz

4. MakerFocus 2pcs Raspberry Pi DC Brushless Cooling Fan Heatsink Cooler Radiator Connector Separating One-to-Two Interface 3.3V 5V for Raspberry Pi 2/ Pi 3/3B+ and Pi Zero/Zero W or Other Robot Project

MakerFocus 2pcs Raspberry Pi DC Brushless Cooling Fan Heatsink Cooler Radiator Connector Separating One-to-Two Interface 3.3V 5V for Raspberry Pi 2/ Pi 3/3B+ and Pi Zero/Zero W or Other Robot Project

Feature

Description

Color:2pcs mini fan 3.3V 5V

2pcs Raspberry Pi DC Brushless Cooling Fan Heatsink Cooler Radiator Connector Separating One-to-Two Interface 3.3V 5V for Raspberry Pi 2/ Pi 3/3B+ and Pi Zero/Zero W

Features:
This Pi fan not only support Raspberry Pi 2/ Pi 3/3B+ and Pi Zero/Zero W, but compatible with other development board.
Its connector is separating, One-to-Two interface, can choose 3.3V or 5V.
Rated voltage: DC5V
Working voltage: 3.0-5.8V
Current: 0.18A
Air volume: 5 m³ / h
Number of revolutions: 13200RPM
Noise: 18 dB

Package Including
2 * pi fan
8 * nuts M2.5
8 * screw M2.5 * 14mm

5. GeeekPi Raspberry Pi 4 Fan, Raspberry Pi Cooling Fan 30x30x7mm DC 5V Brushless CPU Cooling Fan with 7PCS Raspberry Pi Heatsink for Raspberry Pi 4 Model B,3B+,Pi 3 & Retroflag NESPI CASE Plus (1-Pack)

GeeekPi Raspberry Pi 4 Fan, Raspberry Pi Cooling Fan 30x30x7mm DC 5V Brushless CPU Cooling Fan with 7PCS Raspberry Pi Heatsink for Raspberry Pi 4 Model B,3B+,Pi 3 & Retroflag NESPI CASE Plus (1-Pack)

Feature

Description

Descriptions:
It used for used for Raspberry Pi 4,Pi 3, Pi 2, Pi Model B+.
The DC 5V cooling fan run smoothly and quietly and it’s good for heat dissipation of Raspberry Pi. It can be assembled easily by screws.
The aluminum heatsinks has thermal conductive adhesive tape on the back.
Package Includes:
1x Cooling Fan
1x Screw Set
3x Heatsinks for raspberry pi 3B+/3B/2B/B+
4x Heatsinks for raspberry pi 4 Model B

6. 4PCS 4010 3D Printer DC Brushless Blower Cooling Fan Oil Bearing with 2 Pin Terminal for Hotend Extruder Heatsinks Makerbot MK7 MK8 CPU Chip Arduino Other Small Appliances Series Repair Replacement

4PCS 4010 3D Printer DC Brushless Blower Cooling Fan Oil Bearing with 2 Pin Terminal for Hotend Extruder Heatsinks Makerbot MK7 MK8 CPU Chip Arduino Other Small Appliances Series Repair Replacement

Feature

Description

Color:12V

This helps to prevent the heat from the nozzle traveling too far upwards.
Without this fan, the filament could get soft above the heater block, which leads to extrusion issues and degradation of print quality.
This is a DC 12V 0.08A cooling fan.
Dimensions are 40mm x 40mm x 10 mm.
Sufficient for use in 3D printing, operating speed is 6000 RPM.
Equipped to properly cool your 3D printer’s extruder assembly, this extruder fan is compatible with the MakerBot Replicator 2 and MakerBot Replicator 2X.
Also compatible with Flashforge, CTC, and other 3D printer types.

 

Specification:

Rated Voltage: DC 12V

Consuming Current: 0.08A

Connector: 2pin-ph2.5

Speed: 6000 + -10% RPM

Air Flow: 6.5 CFM

Static Pressure: 2.9

Noise Level: 27dBA

Note: Any questions, you can contact us and we will give you a satisfied solution!

Notice!!!

Please check the fan plug, maybe the plug was wired opposite of the fan it was replacing, that is reverse polarity.

7. Replacement Heatsink Fan for DaHua DVR CPU Fan,Heatsink Fan for DaHua DVR CPU Fan,HDCVI Camera Fan,HD DVR Motherboard BGA Cooler Fan,5V DAHUA Fan with 2 Wire 2 Pin

Replacement Heatsink Fan for DaHua DVR CPU Fan,Heatsink Fan for DaHua DVR CPU Fan,HDCVI Camera Fan,HD DVR Motherboard BGA Cooler Fan,5V DAHUA Fan with 2 Wire 2 Pin

Feature

Description

Feature
Voltage:5V
2Wire 2Pin

Package:
1 * DaHua DVR HDCVI Camera Fan

8. BAY Direct Heatsink Cooling fan for DaHua DVR/HDCVI Camera Fan DVR Motherboard Fan 5V DAHUA Fan with 2 Wire 2 Pin

BAY Direct Heatsink Cooling fan for DaHua DVR/HDCVI Camera Fan DVR Motherboard Fan 5V DAHUA Fan with 2 Wire 2 Pin

Feature

Description

Feature
Voltage:5V
2Wire 2Pin

Package:
1 * DaHua DVR HDCVI Camera Fan
1 * Warranty Card

9. 4 PCS 3D Printer Cooling Fan, 40mm x 40mm x 10mm Oil Bearing Cooling Fan with 2 Pin Terminal for Hotend Extruder Heatsinks Makerbot MK7 MK8 CPU Chip Arduino(12V 0.08A)

4 PCS 3D Printer Cooling Fan, 40mm x 40mm x 10mm Oil Bearing Cooling Fan with 2 Pin Terminal for Hotend Extruder Heatsinks Makerbot MK7 MK8 CPU Chip Arduino(12V 0.08A)

Feature

Conclusion

By our suggestions above, we hope that you can found 40Mm Cooling Fan Heat Sink for you.Please don’t forget to share your experience by comment in this post. Thank you!

Home Preview
Logo
Enable registration in settings - general